Overview
Regular cleaning and inspection help commercial cubicles and lockers remain presentable and functional. The correct method depends on the approved panel, finish and hardware, so product-specific care instructions should take priority over a generic cleaning rule.
Routine panel cleaning
Remove loose dirt with a soft cloth. Use a compatible mild cleaner and clean water as directed for the selected material. Avoid abrasive pads, metal scrapers and unapproved aggressive chemicals that may mark the surface or damage finishes.
Clean hardware and profiles
Wipe locks, knobs, indicators, hinges and profiles without flooding joints or mechanisms. Stainless-steel and coated components may require different products. Do not assume that one polish or chemical suits every metal finish.
Inspect moving components
Check door alignment, hinge movement, lock operation, indicator function and knob security. Tighten or replace components through qualified service personnel when movement becomes loose or uneven. Do not wait for a failed component to affect the door or panel.
Check supports and junctions
Inspect legs, shoe-box bases, wall channels, top rails and suspended interfaces for movement or visible damage. Floating and ceiling-hung systems should be reviewed according to their approved support and maintenance requirements.
Locker-specific checks
Test locks, hinges and door alignment. Keep ventilation or gaps unobstructed where part of the design. Avoid overloading shelves or hanging arrangements beyond the approved use.
Record damage and repairs
Photograph impact damage, water ingress, loose fittings or misuse and report it promptly. Using an incorrect substitute component can affect alignment and warranty evaluation. CubiclePro provides a one-year warranty on hardware, profiles and installation workmanship, subject to normal usage and CubiclePro warranty conditions. Panel warranty applies according to the approved material grade and the respective manufacturer's warranty terms. CTA: For maintenance compatibility or replacement-component questions, contact CubiclePro through Technical Enquiry.